Easement can be built upon during fence installation in Jordan, MN. The most important aspect to understand when preparing to put a fence on an easement is that it will need to be accessed by the city on demand. During the permit process you will sign clauses that state your fence, on an easement, can be uprooted, or even altered when access to the easement is needed.

Property pins are placed on the exact corners of your property and are used to define your property lines. Having pins exposed will be necessary for surveyors and installers to ensure your fence is within your boundaries.

Fences can be placed in any position on your property as long as they do not block public passageways or utilities. A fence cannot be built directly on a property line unless both neighbors agree. Certain areas are unfit to construct a fence, such as wetlands.

Jordan, MN requires all property owners to not only follow their fencing codes, but also their specific sub-division’s. Fences can add value to your home, and, in turn, your neighborhood. Picking a fence that is also cohesive with your community can help promote well-maintained properties as a priority.

Follow all of the rules associated with notifying your neighbors, and even rules on sharing a fence on adjoining property line.

If your fence is built completely on your own property, there is no legality forcing you to tell your neighbors. It can be beneficial to let them know if your plans to avoid conflicts in the future. It can even open the conversation of creating a boundary fence where costs can be shared between you and an adjoining property owner.

To build a boundary fence, you will need a preset agreement with a neighbor prior to construction. This agreement should outline each neighbors specific responsibilities concerning building and repair costs, maintenance, and labor. If an existing fence is damaged and no agreement has been made, the neighbors have shared ownership and are equally responsible for its well being.

After understanding how to approach your neighbors, and figuring out where you can perch your fence, there are other protocol to follow. This includes how to apply for a permit and take care of serious issues, such as any projected utility interference.

Jordan MN does require residents to submit a completed zoning application and have it approved before starting construction. The application will require two site plans, which depict the area 30 feet past your property lines, as it will be with your prospective fence. When your fence is complete, you will need to schedule a final inspection with the Building Inspector.

The installer of the fence is responsible for avoiding any damage to underground utility lines. Since installation companies are liable for damages, they take the responsibility of contacting utilities to determine areas which should be avoid.

An exact site plan will be required for your permit application. This will required a certified surveyor to visit your property to get precise measurements for a properly scaled plan. Northland Fence has a staff surveyor who can assist in creating a proper plan.

Pools can be a safety hazard, especially to small children, and will need to be surrounded on all sides by a fence at least 4 feet in height. Pool fences need to be capable of closing and latching on their own and should also be locked when not in use. You will need your fence to be at least 4 feet from the edge of the water to allow enough room for passage.

Finding a fence that accents your property is difficult, but especially so when there are rules to follow from the city, and from your particular subdivision. Check with homeowner associations to know your covenant’s particular design standards.

A fence within the front setback, in front of your home, has a maximum height of 3.5 feet. In the backyard, your fence is allowed to reach up to 6 feet. Additionally, your fence should allow 2 inches between the bottom of the panels and the finished grade of the ground.

Aside from height regulations, there are a few other restrictions when it comes to design, most of which are safety concerns. A fence should in no way visually obstruct traffic. Defensive designs, such as electric fences or barbed wire, are not allowed on a residential lot. Any time a fence has a finished side, it should be faced towards the public to resist climbing.

To choose a fence, start by considering what you need it for, is it to add visual appeal or privacy? This will help you narrow down design options. Material is another important choice. Many modern fences use vinyl which is lighter and more durable than traditional wood, not to mention it won’t rot. Common chain link’s lifespan and look can also be improved with a simple coating or enamel.

The many regulations for fence installation in Jordan, MN should not be overlooked, or forsaken, for design. Each situation is different, so there are always special circumstances that can be furthered examined by contacting Jordan City Hall.